kilburn engineering ltd.
fluid bed dryer fuel gas conditioning system tea dryers
 
 
 
 Range Of Products
Dryers & Coolers
Adsorption Systems
Oil Field Systems
Heat Transfer Systems
Fabricated Equipments
Material Handling Systems
Air & Dust Handling Systems
   
 
 Heat Transfer Systems
Fired Heaters
(Direct & Indirect)
Finned Tube Heaters & Coolres
Furnaces
Incinerators
DeNox Systems
Heat Recovery Systems
 
 
PRODUCTS
HEAT TRANSFER EQUIPMENT &
COMBUSTION SYSTEMS
 

KILBURN has decades of experience in design, manufacture & commissioning of the entire range of heat transfer equipment and systems. These equipment include shell & tube Heat Exchangers, Finned Tube Heaters & Coolers, Incinerators, and Direct / Indirect type Heaters in various sizes, capacities, pressures, temperatures and materials of construction.
These systems are designed for specific requirements to suit individual applications. All air heaters for KILBURN Drying Systems are specially designed to match the drying requirements.

 
steam-reformer-package Heat Transfer Equipment & Combustion System
                Steam Reformer Package Fired Heater for Mitsubishi Chemical Corporation
 
 
TECHNICAL ASSOCIATION
 
Kilburn has technical association with NOVARGI ( Nova-Synergy Industrial Solutions, Spain, S.L.) for several heat transfer & allied & systems, including Fired Heaters, Incinerators, Reformers, Waste Heat Recovery System, DeNox Systems, etc.
With experience & expertise in design and manufacture of & technical tie-up, Kilburn is geared to design & manufacture optimized heat transfer systems for specific applications.
 
 
INCINERATOR & GASIFICATION PACKAGES
 
Novargi-Kilburn design, develop and supply Incinerators & Gasification Packages from different waste products.
 
 

Tonnage capacity, thermal capacity and heat recovery depend upon specific application.

Combustion conditions in this application shown here are :
850°c : 2 seconds
1150°C : 2 seconds
 
Non-organic fraction and medical waste are used as fuel.
 
 
 
 
 
 
 
incineration
 
incineration
                                INCINERATION
 
 
 
 
 

Novargi has developed biomass-to-energy technological solutions to produce syngas and to produce steam or electricity as required.

This plant employs air gasification and clean up lines for the produced gas.

Cyclone, scrubbers and other specialities are employed to adequate the gas for electrical generation.
 
 
DeNOx SYSTEMS
 
NOx refer to nitrogen oxides in the form of reactive gases. These gases are the products of combustion when coal, natural gas or waste products are burnt at high temperatures.
 
denox_systems

Environmental issues have been raised as NOx are detrimental to ozone layers and cause acid rains, etc. Demand of NOx Systems is therefore increasing.

DeNox ( Denitrification process ) uses acquous and / or anhydrous ammonia. The processes used are selective & non-selective Catalytic Reduction ( SCR & NSCR).

Novargi–Kilburn undertake design & supply of these systems.
 
 
FIRED HEATERS
 
Novargi-Kilburn process Fired Heaters & Incinerators are basically of 4 types :
 
i. Cylindrical Fired Heaters
ii. Cabin Fired Heater
iii. Air Preheater Sysems
iv. Others
 
KEL provides complete solutions including basic & detailed engineering. All relevant components are also supplied.
fired_heaters.jpg
 
 
WASTE HEAT RECOVERY SYSTEMS
 
Novargi-Kilburn provide complete solutions for Heat Recovery Steam generator units, from start to finish ( basic engineering to commissioning).
 
waste_heat_recovery_systems

The specifications ( capacity, thermal rates) and design vary from case to case and industry to industry. Several industries find these systems very viable.

Power generation units employ a gas turbine with a heat recovery steam generation unit.
 
 
APPLICATIONS
Heat transfer systems are designed for all industries, e.g. chemical, petrochemical, food, fertilizers, rubber, sand, gas, oil or atomic energy.
 
SALIENT FEATURES
of KILBURN HEAT TRANSFER SYSTEMS
 

High thermal efficiency

Special material of construction

Minimal & easy maintenance

Suitable for specific fuel :
oil, gas, steam or electricity
  Long operating life Low operating costs
  High capacity to cost ratio a

Quality fabrication

 
OTHER EQUIPMENT / INSTALLATIONS
 
Tailor made Heaters supplied for various dryers :  For almost all types of industries
Finned tube for Heat Exchangers  :  Nuclear Power Corporation
Fired Heater for Compressed Air :  Gas Turbines & Research Establishment (GTRE),     Dept of Defence
Finned Tube Heater for PVC plant :  Finolex Industries
Fired Heater for Sulphurous Gas :  Mitsubishi Chemical Corporation, Haldia
 
Heat Transfer Equipment & Combustion Systems Heat Transfer Equipment & Combustion Systems
 
 

Translate This Page To:

AlbanianArabicBulgarianCatalanChineseCroatianCzechDanishDutchEnglishEstonianFilipinoFinnishFrenchGalicianGermanGreekHebrewHindiHungarianIndonesianItalianJapaneseKoreanLatvianLithuanianMalteseNorwegianPolishPortugueseRomanianRussianSerbianSlovakSlovenianSpanishSwedishThaiTurkishUkrainianVietnamese